| Customization: | Available |
|---|---|
| After-sales Service: | 24-hour online service,free accessories |
| Warranty: | 18 month |
|
Still deciding? Get samples of US$ 2189/Unit
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Stable revolving speed of the gear transmission ensures the consistency and repeatability of the experiment.
Planetary movement principle is adopted in the machine, which has high speed, large energy, high efficiency, small Granularity.
Four powder samples from different sizes and different materials can be produced at one time.
The laboratory planetary ball mill is controlled by frequency converter, you may choose ideal rotating speed according to expected experimental result. The converter is equipped with device of under voltage and over-current to protect the motor.
The planetary ball mill has functions of timing power off, self-timing forward and reversal rotating. You may choose freely any operation modes of one-way direction, alternation, succession, time setting according to experimental needs, so as to improve efficiency of grinding.
Technical features of Ball Mill: Low center of gravity, stable performance, compact structure, easy operation, reliable safety, lower noise, small loss.
Safety switch is installed on the machine to prevent safety accident if the safety cover is opened while machine is running.
Planetary Ball Mill often has four ball grinding tanks installed on one turntable. When the turntable rotates, the tank axis makes planetary movements, the balls and samples inside the tanks are impacted strongly in high speed movement, and samples are eventually ground into powder. Various kinds of different materials can be ground by the mill with dry or wet method. Minimum granularity of ground powder can be as small as 0.1μm.
| Drive Mode | Gear drive or belt drive |
| Operation Mode | Two or four mill jars can be used for each grinding |
| Max Load Capacity | Less than 1/3 of each jar volumeTotal max capacity: less than 1/3 of total jars volume |
| Feed Size of Materials | Soft and crispy materials ≤ 10mmOther hard materials ≤ 3mm |
| Output Granule | Smallest granularity can be achieved to 0.1μm |
| Rotational Speed Ratio | 1/2 |
| Max.Continuous Operating Time | 72 Hours |
| Materials of Available Mill Jars | 304 Stainless steel, 316l stainless steel, Zirconia, Nylon, Polyurethane,Alumina ceramic (corundum), PTFE, Agate, Tungsten carbide |
| Technical Parameter Table(I) of Vertical Laboratory Planetary Ball Mill(Semi-circle Round Type) | ||||
| Type NO | Spec. | Volume of Each Matched Pot | Quantity | Remarks |
| PBM-V2SC | 2L | 50-500ml | 4pcs | Matched with vacuum mill pots from 50ml to 250ml |
| PBM-V4SC | 4L | 250-1000ml | 4pcs | Matched with vacuum mill pots from 50ml to 1000ml |
| PBM-V8SC | 8L | 1-2L | 4pcs | Matched with vacuum mill pots from 50ml to 1500ml |
| PBM-V10SC | 10L | 1-2.5L | 4pcs | Matched with vacuum mill pots from 1L to 2L |
| PBM-V12SC | 12L | 1-3L | 4pcs | Matched with vacuum mill pots from 1L to 2L |
| PBM-V16SC | 16L | 2-4L | 4pcs | Matched with vacuum mill pots from 1L to 3L |
| Technical Parameter Table(II) of Vertical Laboratory Planetary Ball Mill (Semi-circle Round Type) | |||||||
| Model | Power (KW) | Voltage | Revolution Speed (rpm) | Rotation Speed (rpm) | Total Timing (min) | Alternating Run Timeof Forward & Reversal Rotation (min) | Noise ≤db |
| PBM-V2SC | 0.75 | 220V-50Hz | 35-335 | 70-670 | 1-9999 | 1-999 | 60±5 |
| PBM-V4SC | 0.75 | 220V-50Hz | 35-335 | 70-670 | 1-9999 | 1-999 | 60±5 |
| PBM-V8SC | 1.5 | 220V-50Hz | 35-290 | 70-580 | 1-9999 | 1-999 | 60±5 |
| PBM-V10SC | 1.5 | 220V-50Hz | 35-290 | 70-580 | 1-9999 | 1-999 | 60±5 |
| PBM-V12SC | 1.5 | 220V-50Hz | 35-290 | 70-580 | 1-9999 | 1-999 | 60±5 |
| PBM-V16SC | 3 | 380V-50Hz | 30-255 | 60-510 | 1-9999 | 1-999 | 60±5 |
| Technical Parameter Table (III) of Vertical Laboratory Planetary Ball Mill (Semi-circle Round Type) | ||||
| Model | Power (KW) | Speed Control Mode | Net Weight (kg) | Size (mm) |
| PBM-V2SC | 0.75 | Frequency Control | 80 | 750x470x590 |
| PBM-V4SC | 0.75 | Frequency Control | 80 | 750x470x590 |
| PBM-V8SC | 1.5 | Frequency Control | 132 | 880x560x670 |
| PBM-V10SC | 1.5 | Frequency Control | 132 | 880x560x670 |
| PBM-V12SC | 1.5 | Frequency Control | 132 | 880x560x670 |
| PBM-V16SC | 3 | Frequency Control | 203 | 950x600x710 |
){kind=link}