| Customization: | Available |
|---|---|
| After-sales Service: | 24-Hour Online Service,Free Accessories |
| Sample Type: | Liquid |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Model Features:
The components in contact with the material are crafted from high borosilicate glass (with an expansion coefficient of 3.3) and PTFE materials, ensuring stable performance and minimal reactivity with the substances.
Stand is composed of cold plate anti-corrosive spray and aluminum alloy material, while the bath is constructed from 304 stainless steel.
Sealing system employs a compound sealing of PTFE and fluororubber.
An oily vacuum pressure gauge provides real-time vacuum indication through a pointer.
Piston-type feeding valve is fitted with a PTFE extension tube, enabling continuous feeding to the evaporation bottle under vacuum conditions.
A vertical three-layer serpentine coil functions as the condenser, featuring both main and auxiliary condensing for enhanced efficiency.
Large LCD display allows simultaneous control of rotation, heating, and lifting.
Brushless deceleration booster motor is utilized as the rotary motor, ensuring spark-free and low-noise operation. The lifting motor also employs the deceleration booster motor.
A thermostat-controlled bath incorporates a PT100 sensor and stainless steel probe at the bath's base.
Bath can be electrically lifted, and a silicone cover offers heat insulation and anti-scalding protection.
Dual fuses provide safety protection for both rotation and heating.
Collection bottle features a lower discharging port connected to a glass and PTFE independent discharge valve.
A water discharge valve at the bottom of the bath facilitates liquid removal.
A vacuum switching valve enables continuous material collection and discharge without affecting system vacuum or solution distillation.
An over-temperature protection function automatically powers off the machine when the actual temperature exceeds the setting temperature by 5°C.
An anti-drying function automatically powers off the machine when the water level in the heating bath falls below the heating tube.
In case of a sudden power interruption during operation, the machine will automatically cease heating and resume when power is restored.
| Model | RE-1050 |
| Voltage/Frequency | 220V 50Hz/110V 60Hz |
| Total Power | 6640W |
| Rotary motor power | 100W |
| Lifting motor power | 40W |
| Heating power | 6500W |
| Vacuum | 0.095Mpa |
| Rotary flask volume | 50LΦ470mm/Φ125 flange port |
| Collecting flask volume | 20LΦ355mm/upper Φ60 flange port×Φ35 flange port×2pcs×lower Φ50 flange port |
| Rotary speed | 0-120rpm/min |
| Temperature control range | Room temperature-180ºC |
| Temperature control accuracy | ±1ºC |
| Bath lifting stroke | 215mm |
| Condenser Size | Main condenser Φ160×835H(mm), upper Φ60 flange port, lower Φ80 flange port |
| Auxiliary condenser Φ160×530H(mm), upper Φ80 flange port, lower Φ60 flange port, side Φ60 flange port | |
| Condensing area | 1.44(0.95+0.49) |
| Gas cylinder | Left Φ35 flange port, upper Φ35 flange port, side Φ60 flange port, right Φ70 flange port |
| Material feeding valve | Φ35 flange port, glass + PTFE valve, material feeding valve (pagoda joint) with 12mm outer diameter |
| Multi-function port | Φ35 flange port, glass + PTFE valve, glass valve (pagoda joint) with 12mm outer diameter |
| Releasing valve | Φ35 flange port×2pcs, glass + PTFE valve, releasing valve (pagoda joint) with 12mm outer diameter |
| Material discharging valve | Φ50 flange port, side discharging valve (pagoda joint) with 20mm outer diameter, 300mm from the ground |
| Vacuum nozzle | Φ60 flanged glass nozzle(pagoda joint)with 10mm outer diameter |
|
In and out circulating nozzle of condenser coil |
Pagoda joint with 16mm outer diameter |
| Bath Size/weight | Φ550×320H(mm) about 76L |
| Sizes(W×D×H)(mm) | 1390×700×2300 |
|
Shipping size (W×D×H)(mm) |
980×520×1190mm wooden package |
| N.W./G.W. (kg) | 97/142 |
){kind=link}