| Customization: | Available |
|---|---|
| Certification: | ISO9001 |
| Application: | laboratory |
|
Still deciding? Get samples of US$ 490/unit
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The deionized water purifier has power indicator, pump work indicator, low pressure indicator and system flushing indicator functions.
Using imported ion filtration membranes and high-pressure, silent pure water pumps, the operation quality is more reliable and it is applicable to a wider range of water quality;
It has system flushing function: every time before turning on the water machine, it will automatically flush for 30 seconds and then the system will start to make water;
It has system protection function: when the water pressure is too low or there is no water, the equipment automatically shuts down, and when the water source comes in, the equipment automatically turns on;
The WP-DU series ultrapure water machine has an online water quality monitoring function, which can monitor the incoming water quality (located above the instrument, near the function detection area, indicated by a digital tube), RO water quality and temperature, and pure water quality and temperature in real time.
| Model | WP-D10U | |
| Water Supply Requirement | Tap water: TDS<200ppm; Water pressure >0.1Mpa; Water temperature: 5-45ºC | |
| Pure Water Quality | Conductivity | 0.1us/cm (25ºC) |
| PH value (25ºC) | None | |
| Oxidizable (Calculated as O) | Technical requirements: <=0.08mg/L; | |
| Test results: <=0.08mg/L | ||
| Evaporation Residue (105±2ºC) | Technical requirements: <=1.0mg/L; | |
| Inspection results: 0.7mg/L | ||
| Inspection Basis | GB/T6682-2008 | |
| Consumption | 25W | |
| Water Output Speed | 10L/h | |
| Control System | Operation mode display: power, water shortage, flushing, full water, inlet water quality monitoring, RO water quality and temperature UP water quality and temperature, etc. | |
| Safety Performance | Automatically enters standby state when there is no water or low water pressure, and enters standby state when the system is full of water (constant pressure). | |
| Purification System | Pretreatment unit, external softening filter (recommended in places with high raw water hardness); | |
| 1μm deep PP filter element*2+precision activated carbon filter element | ||
| RO Reverse Osmosis Unit | American original RO reverse osmosis membrane/membrane group | |
| Post Purification Unit | Purification column | |
| Standard Accessories | Host + accessory package + 6G pressure barrel | |
| Shipping Size (WxDxH)(mm) | 533x435x550 | |
| N.W/G.W | 23kg/25kg | |
){kind=link}